Twin Tank Water softeners are a fantastic, cost-effective way to deliver soft water to your home. It may be a single faucet softener or whole-house water softener like those below but no matter what suits your needs, it will mean stunning results for you and your family. This article provides guidance on twin tank softeners, what they are, how you can benefit from them, and the best on the market right now.
Our Recommend Picks
Best Overall
Best Value
Best Budget-Friendly
ABCwaters built Fleck 5600sxt Water Softener and Upflow Carbon Filtration
DuraWater 64k 9100sxt water softener
AFWFilters WS-96k-91SXT Fleck 9100SXT Dual tank water softener 96k
Please see below for the 10 best twin tank softeners on the market right now, along with a useful summary of the features, benefits, pros, and cons for each. It is always important to consider your individual requirements so that you can find the most suitable for your home or office.
The DuraWater Fleck 5600XT water softener is an excellent up-flow water softener that utilizes a 5 stage reverse osmosis system. It has pre and post-filters, a 3.2-gallon storage tank, and will deliver outstanding soft water for your home.
This dual tank system will help remove countless harmful contaminants found in your water supply including chlorine and it doesn’t require any backwashing. This results in minimal water usage and wastage, as well as low salt use. It has a 48,000-grain capacity which will deliver results for most households.
Pros
Cons
A 5-stage reverse osmosis water softener system
Low water and salt usage
No backwashing required
Some people may require support in getting this unit installed
2. AFWFilters WS-96k-91SXT Fleck 9100SXT Dual tank water softener
A high capacity twin tank water softener, with an incredible 96,000-grain capacity. These dual tanks mean that the system is able to always be working, helping deliver constant soft water for the whole house.
Some features include an effective LCD display, touchpad controls, and an on-demand flow meter that means it only regenerates when the water has been used, minimizes wastage. It can treat hard water at a flow rate of 20-gallons per minute (20 GPM), removing the hard-causing minerals in your water such as calcium and magnesium. It is relatively easy to install but some people may prefer to get a professional to assist.
Pros
Cons
A massive 96,000-gallon grain capacity
It has a flow rate of 20GPM
An effective LCD display and control panel
It may be far more than required for some households so there will be cheaper options out there
3. Discount Water Softeners Genesis 2 Duo 48,000 Grain Water Softener
The next twin tank water softener on our list is this whole house model with a decent 48,000-grain capacity. It has a whole hose of useful features which is why it makes it onto our list of the best twin tank water softener models on the market. These include a chlorine filter and removal system, up-flow brining, and a helpful digital meter.
You will really notice the difference in your water if you suffer from a lot of chlorine or particularly hard water. Thankfully, it is also relatively easy to install if you don’t mind spending an hour or two on it, or you can pay for a professional to sort it out.
Pros
Cons
It has a 48,000-grain capacity
An effective chlorine filter
A digital meter system and control panel
It may be too complex for some people or at the minimum a bit time-consuming to install.
AFWFilters are one of the heavyweights in water filtration systems and this water softener really does deliver the soft water you will want. It is another large system, with an 80,000-grain capacity per tank so that you have a continuous supply of soft water.
Utilizing the Fleck 9100 SXT valve, customers can trust it will perform at the highest level and will be easy to manage. They have even thought about the installation with this model, making it a little easier to install than some of the other water softener systems on this list. The only downside is there have been reports of not the greatest customer support, should you have any problems.
Pros
Cons
A large 80,000-grain capacity in each tank for continuous soft water supply to the whole house.
An efficient and effective Fleck valve
A 5-year warranty of the valve and 10 years on the tanks.
Customers have reported that the manufacturer’s helpline isn’t the greatest.
5. ABCwaters built Fleck 5600sxt Water Softener and Upflow Carbon Filtration
This is a complete water softener system, made up of a whole house water softening system and an upflow carbon filtration system. With a 48,000-grain capacity, it will be able to work with a flow rate of 12GPM which should be more than enough for the average household.
The manufacturer provides a useful guide for the installation process, along with an installation kit and technical support. Its upflow design means that there is no backwash or electricity required, as well as no wastewater so you can trust it is better for the environment. The carbon filter helps remove a range of harmful contaminants, whilst helping reduce the water hardness level.
Pros
Cons
An upflow carbon filtration design helps remove harmful contaminants
It comes with all the stuff you need including guides for installation
Controlled by the popular Fleck 5600 SCT digital valve
The tanks on this model are smaller than some others on our list
6. AFWFilters Fleck 9100 Dual tank water softener 48k
This dual tank water softener includes a Fleck 9100 SXT metered control head, as well as a 48,000-grain capacity. Each tank contains high capacity resin, removing up to 48,000-grains of hard water between each regeneration cycle. Throw in a flow rate of 12GPM and you can trust it will deliver results for the average household.
Unlike a single tank water softener, this system will run efficiently by using less salt and water and never run out. Dual tank water softeners are powerful enough to support the entire household and this one is relatively easy to install using the instructions, or you can leave it to a professional plumber. This system weighs 99lbs and its dimensions are 38 x 1- x 62 inches.
Pros
Cons
An impressive 12GPM flow rate so it can cope with a normal-sized household
It has a 48,000-grain capacity
Reduced water consumption thanks to its clever design
It does require salt so this may not be for those who want a low sodium or sodium-free diet
7. Filtersmart Whole House Water Filter System & Salt-Free Water Softener Combo
One of the salt-free water softeners to make it onto our list today is this water softening system from Filtersmart. A whole-house filtration system that delivers results in a healthier, eco-friendly way with minimal maintenance required.
This system uses a carbon filter to remove harmful contaminants such as chlorine, heavy metals, pesticides, and more. This filter is made from natural coconut shells and the only maintenance required is to change out the sediment pre-filter every 8.10 months. NSF has certified these filters will remove chlorine for up to 1,000,000 gallons of hard water. Thanks to its up-flow design, no electricity is required.
Pros
Cons
It will supply soft water to your household without using salt
Its coconut shell carbon filters are NSF certified to work for 1,000,000 gallons.
Eco-friendly thanks to its up-flow design
Some customers have reported faults with their systems
8. Abundant Flow Water WS-64k-91SXT 64k-91sxt dual tank softener
Another dual wank water softener that utilizes the impressive Fleck 9100 SXT digital metered control head. Its two tanks mean you can run have a constant supply of soft water, as one is always working whilst the other goes through a regeneration cycle. With a 64,000-grain capacity and each of the resin tank is capable of delivering soft water with a flow rate of 16GPM.
The ion exchange process will help remove the water hardness causing ions found in almost every water supply. It will protect your pipes, faucets, and fixtures from scale buildup. Made with quality materials including poly-glass you can trust it to stand the test of time but do be aware that whole-house systems can be complex to install so you may require professional assistance.
Pros
Cons
It uses the Fleck 9100 SXT digital meter control head
It has a 64,000-grain capacity
You will get a flow rate of 16GPM which is enough for busy households
The installation instructions aren’t that clear according to feedback from some customers.
9. DuraWater USA Fleck 9100SXT Water Large Homes & Light Commercial Softening Ships Loaded
DuraWater is another well-known manufacture of water softeners and they have teamed up with the Fleck 9100 SXT control valve to help customers get consistently soft water. With a capacity of 32,000-grain, it is a little smaller than some of the other systems on this list but it will still be good enough for most households.
With a height of 48 inches, it is a more compact unit when compared to some of the other water softeners, but there are concerns about it not being as durable. It does get shipped with everything required to install including a male threaded yoke and a water hardness test kit.
Pros
Cons
It uses a Fleck 9100 SXT control valve
With a capacity of 32,000-grains per tank, it will work for most households
This water softener from DuraWater is one of its larger models, at an impressive 64,000-grains per tank. As a result of the twin tank design, you will get a continuous supply of soft water as the regeneration cycle of one happens whilst the other is working.
It features the Fleck 9100 SXT valve for added reliability and it has been built to stand the test of time, so you can trust that it is a good investment. A very cost-effective and efficient system with savings in both water and salt. Weighing 105lbs and measuring 12 x 12 x 52 inches, it is an average size twin tank water softener. As always, these whole-house water systems can be a little time-consuming to install so you may wish to get some assistance.
Pros
Cons
An impressive 64,000-grain capacity in each tank
It uses a Fleck 9100 SXT valve
Very efficient with savings in both water and salt
Some people may require help to install a whole-house water softener like this.
Buyer’s Guide for the Best Twin Tank Water Softener
There are some fundamental factors to consider when buying a water softener and it is important to carefully analyze those factors. Without doing this, you may end up wasting a lot of money on the wrong system.
Local Water Quality
Every household will have a varying degree of hard water going into their home. Some areas may be better than others, but it is always important to understand the quality of your water supply so that you can get the right product.
You can do this by completing simple, home-based tests for hard water or getting a report from the local authority. Once you understand how hard the water supply is, you can then shortlist a twin tank water softener that will cope with your water supply.
Water Consumption
Each household is different in terms of water usage. You may have a smaller household that spends a lot of time out, or a busy family home with lots of people using drinking water, washing, and showers. As a result, you need to do a bit of research on which softeners have the capacity to cope with your level of usage.
This is all about the grain capacity, with the average softeners coping with 48,000 – 64,000 per tank, and some going up to an impressive 90,000-grains. If you go for the wrong one, then it may not deliver the water you need and you will have annoying gaps in the water supply.
Budget
Never a fun topic to discuss but an important one! We all have our own budgets we need to stick to, so think about whether your budget will get you a system that does the job you need. It may be you can save money or equally, need to spend more to get one for your household requirements.
Flow rate
This refers to the soft water that the system can provide every minute, often referred to as Gallons per minute (GPM). Most households will copy with between 7 and 20 GPM, but you should check the performance levels claimed by manufacturers and compare this to customer reviews.
What is a Water Softener?
Water softeners are a household appliance that removes hard water deposits from your water supply. Water hardening can cause a variety of issues, including hard-water spots on dishes, skin irritation, and difficulties with home appliances such as faucets and showerheads. A water softener basically consists of a hard or salt tank that is connected to a brine tank. The salt tank contains hard water which is softened by caustic soda or liquid sodium carbonate. The liquid sodium carbonate acts as a detergent for removing the hard water from the hard tank. It deposits sodium on the surface of the hard minerals, which subsequently precipitates out of the solution, forming sludge in the bottom of the tank. The softened water then flows into the brine tank which contains salt, that is used to mix with hard water. The hard water then flows out of the softener into your home for use.
A water softener works by running hard water through special resin beads inside of the hard tank where hard minerals are removed from hard water. This causes sodium ions to replace the hard water minerals, which is a softer mix. This softened mix then flows into the brine tank that contains salt. The hard water mixes with sodium from the hard water softener and creates hard-water softener salt, which is drained from the brine tank, along with the flow of hard water back to your home for use. For more details on how water softeners work, Just follow our detailed guide.
What are the benefits of having a Twin Tank Water Softener?
There are some fantastic benefits to having such a system, including:
Protecting your skin and clothes
If hard water is left on the body for an extended period of time, hard water can cause hard water spots and hard water rings. These stains on the skin can be especially hard to remove because hard water is slightly acidic and it’s difficult to use substances that are also acidic to remove these marks.
Dealing with hard water also means that your clothes will have a harder time staying bright because hard water can dry out clothes, which reduces their ability to keep their bright colors.
Protecting your hair
Hard water can cause your hair to become brittle and get damaged, becoming matted and painful at times. It also affects the ability of soap to lather and work effectively, of all which can impact how well your hair is cared for. Having an effective water softener is important for your hair, body, and home so it makes so much sense to get one.
Protecting your appliances
The hard water is mixed with hard minerals like calcium and magnesium, which accumulate on hard-to-clean surfaces like soap scum and hard water stains. The hard water also leaves hard deposits on surfaces like showerheads, faucets, and appliance appliances over time. Water softeners are an excellent investment for anyone who lives in a hard water area. Unfortunately, hard water damages appliances, so this can be a substantial cost to either one’s wallet or the environment.
Frequently Ask Question:
What are Twin Tank Water Softeners?
Twin tank water softeners are sometimes known as dual tank systems and the fundamental characteristic is that they use two tanks instead of one to softener water. They work by taking turns to remove the hardness water causing minerals so that during a regeneration cycle, there is always one working to ensure a continuous supply of soft water.
They often have smart valves, such as the Fleck 9100 SXT to ensure maximum efficiency and control. For those wanting a permanent supply of soft water, these do a fantastic job of removing hard minerals including magnesium and calcium.
How does it work?
Firstly, the hard water flows through the water softener system and it is during this process that it goes through the resin tank. At this stage, the minerals that cause hard water get drawn to the resin and help to soften the water.
The resin becomes blocked up with hard minerals and at a certain point, the resin tank needs to regenerate so that it can start to soften the water supply again. As discussed above, twin tank softeners alternate this process so you never have to worry about hard water.
What is hard water?
Hard water is water that contains minerals in the form of hard deposits in drinking, bathing, and cooking water. These hard deposits can cause damage to plumbing and appliances. They can also build up in the human body and lead to problems with skin and hair. The hard deposits in hard water may also affect laundry detergents by causing clothes to be stiff or hard to wash.
The remedy for hard water is a water softener that uses salt to break down the mineral deposits in hard water so that it can’t cause any additional problems. A good example of such a device is a twin tank water softener which has two tanks: one for hard water and one for drinking-quality soft water. It’s important to install a hard-water tank close to hard water pipes and a soft-water tank close to drinking water pipes.
How do I choose the right one?
Please look at our buyer’s guide and the rest of the information on this page for help with this question. It is important to think about what individual requirements your household has, as well as future requirements such as maintenance and cost implications.
Summary
Thank you for reading our article on the best twin tank water softeners on the market right now. We hope it has provided some useful guidance and information to help to make the buying process much easier. As always, it is important to understand the individual requirements of your household, such as usage and levels of hard water before buying a product. If you don’t do this, then you run the risk of wasting money by having a product that doesn’t deliver the soft water you require.
Explore our website for many other guides to achieving soft water and clean water depending on the type of product you require.
Leave a Reply